15双钳多WorkCan接地Electricity阻Measure试仪专为现场MeasureQuantity接地Electricity阻、土壤Electricity阻率、接地ElectricityPress、接地线漏Electricity流、交流Electricity流、直流Electricity阻而精心设计制造的,采用数字处理技术,精密
The 4-wire method, the 3-wire method and the simple 2-wire method, the selection method, the double clamp method to measure the grounding resistance, the large diameter current clamp design, can measure the grounding system using the large grounding lead line, can be flexible and accurate measurement of any grounding resistance value of the single point and mesh grounding and other complex grounding situations, the parallel grounding measurement without disconnecting any parallel grounding electrode, to improve the convenience of measurement to the greatest extent . The introduction of FFT(fast Fourier Transform) technology,AFC(automatic frequency control) technology, with unique anti-interference ability and environmental adaptability, repeated testing consistency, to ensure the long-term measurement of high precision, high stability and high reliability. It is widely used in electric power, telecommunications, meteorology, oil field, construction, lightning protection and industrial electrical equipment and other grounding resistance, soil resistivity, grounding voltage, AC current, leakage current measurement
VICTOR 6415双钳多WorkCan接地Electricity阻Measure试仪又名
双钳接地Electricity阻Measure试仪、
双钳接地Electricity阻仪,由主机、Electricity流钳
(double pliers), data software, test line, auxiliary grounding rod, communication line, etc. Host large LCD disy, with backlight, bar chart indication, at a glance. At the same time can store 2000 groups of data, through the data software can realize the historical data reading, access, save, report, print and other functions
Work Can |
Ground resistance, soil resistivity, DC resistance, ground voltage, AC current, leakage current measurement |
Electricity Source |
DC 9V(锌锰干Electricity池 R14S 1.5V 6节 ,连续On standby300小时) |
Back Light |
可控BackLight,适合昏暗场使用 |
Measurement mode |
精密四线、三线法MeasureQuantity、简易二线、选择法、双钳法MeasureQuantity接地Electricity阻 |
Measuring method |
二三四线法MeasureQuantity：变极法,MeasureQuantityElectricity流
20mA Max
|
Measure试ElectricityPress波形 |
Sine wave |
Test frequency |
128Hz/111Hz/105Hz/94Hz(Automatic frequency selection) |
短路Measure试Electricity流 |
AC 20mA max |
开路Measure试ElectricityPress |
AC 40V max |
Electricity极间距范围 |
1m～100m |
Disy mode |
4位大LCD显示,带BackLight |
Measurement indication |
MeasureQuantity中 LED flashing indicator,LCD backward count disy |
LCD size |
128mm×75mm |
LCD disy domain |
124mm×67mm |
Instrument size |
Height and width: 215mm×190mm×95mm |
Electricity流钳尺寸 |
Height and width: 185mm×115mm×43mm |
Measure The test line |
Four pieces: red 20m, black 20m, yellow 10m, green 10m each |
简易Measure试线 |
2 pieces: red 1.6m, black 1.6m each 1 |
Auxiliary ground rod |
4 pieces: φ10mm×150mm |
Electricity Flow pliers |
2: blue and black plug, red and black plug 1 |
Electricity流钳口径 |
φ68mm |
Electricity流钳匝比 |
1000:1 |
Electricity流钳引线 |
Long 2m |
MeasureQuantity时间 |
交流Electricity流：约
2 times per second
|
MeasureQuantity次数 |
5000次以上(短路Measure试,Measure1次,停30秒再Measure) |
线路ElectricityPress |
AC 600V以下MeasureQuantity |
RS232 interface |
Have RS232 interface,存储数据可以Through过软件上传Electricity脑 |
Through Communication line |
RS232Through讯线1条,Long1.5m |
Data retention |
When holding data “ HOLD The symbol indicates |
Data storage |
2000 groups, " MEM "Store instructions, show" FULL The "symbol indicates that the storage is full |
Data retrieval |
When looking up data “ READ The symbol indicates |
Overflow disy |
When the overrange overflows “ OL The symbol indicates |
Electricity流钳低Electricity流指示 |
选择法或者双钳法MeasureQuantity时 ,当CT2接收的Electricity流信号低于0.5mA时,显示 符号,此时应检查CT2Electricity流钳的钳入方向 |
干扰Measure试 |
自动识别干扰信号,干扰ElectricityPress高于 5V " NOISE The symbol indicates |
辅助接地Measure试 |
Have辅助接地Electricity阻值Measure试WorkCan, 0.00kΩ～30.00kΩ(100 R + rC <50kΩ,100 R + rP <50kΩ) |
报警WorkCan |
MeasureQuantity值过报警设定值时, "Toot toot toot" alarm prompt |
Electricity池ElectricityPress |
当Electricity池ElectricityPress降到约 7.5V时,Electricity池ElectricityPress低符号 显示,提醒更换Electricity池. |
Automatic shutdown |
Boot 15分钟后Automatic shutdown |
Work Consumption |
BackLight： 25mA Max(单独BackLightConsumptionElectricity) |
On standby : 25mA Max(Boot后BackLight关闭) |
|
MeasureQuantity： 150mA Max(BackLight关闭) |
|
Quality Quantity |
QualityQuantity： 8.05kg(including packaging) |
Instrument: 1653g(含Electricity池) |
|
Electricity流钳： 1050g(2 handfuls) |
|
Measure试线： 1560g(含简易Measure试线) |
|
Auxiliary ground rod： 935g(4 sticks) |
|
Working temperature and humidity |
-10℃ ~ 40℃; 80percentrh below |
Storage temperature and humidity |
-20℃ ~ 60℃; 70percentrh below |
Overload protection |
MeasureQuantity接地Electricity阻： C(H)-E 、 P(S)-ES Between ports AC 280V/3 s |
绝缘Electricity阻 |
20MΩ以上(Electricity路与外壳之间500V) |
Resistant to Press |
AC 3700V/rms(Electricity路与外壳之间) |
Electricity磁特性 |
IEC61326(EMC) |
Suitable for safety rules |
IEC61010-1(CAT Ⅲ 300V,CAT IV 150V, pollution level 2); IEC61010-031;
|
