one Give an account of
VICTOR330 is a 1.5V battery driven, three lines of digital liquid crystal disy, high integration, stable performance, reliable a household type hygrograph
2. General characteristics
2.1 Enabling the power pool: AAA 1.5V
2.2 Temperature measurement range: 0℃~50℃ (32℉~122℉)
2.3 Temperature measurement accuracy: ±1.0℃ (±1.8℉)
2.4湿度测量范围：30%RH~90%RH
2.5 Humidity measurement accuracy: ±5percent (40percentRH~80percentRH) Other ±8percent
2.6 degrees Celsius and Fahrenheit switch to each other
2.7 Maximum/minimum temperature and humidity memory function
2.8 Disy time 12/24 hour system, month, day, temperature, humidity, alarm clock, hour alarm
2.9 Key Reset Function
Three. Function setting
3.1 Powering On
2 seconds after the LCD full disy is powered on, the clock mode AM12:00 disys the current temperature and humidity
3.2 Clock
3.2.1 In this MODE, hold down the MODE key for 2 seconds to enter the clock setting state, clock minutes start to blink, press ADJ to set the value, press MODE key to set hour,12/24 hour system, month, day,ADJ key to set,MODE key to confirm
3.2.2 In Clock Mode, press ADJ to view the date and automatically return to clock mode 3 seconds later
3.3 Alarm Clock
3.3.1 Press the MODE key in Clock mode to switch to the alarm clock mode
Press the MODE key for 2 seconds to enter the alarm setting MODE and blink at the minute. ADJ key to set and mode key to confirm.
3.3.2 In Alarm Mode, press ADJ to turn on the alarm. Enable snooze function; Turn on the hour time AL and turn off the alarm and snooze function at the same time; Turn on the alarm; Turn on the snooze; At the same time, turn off the alarm, snooze, and strike the hour
3.3.3 When the AL symbol is disyed, it indicates that the hour signal is set. The hour and the alarm clock
At the same time, alarm clock priority
3.3.4 Automatically Return to Clock Mode after 1 minute in Alarm mode.
3.4 Snooze function
When the alarm is on, the snooze function is effective. When the alarm time is up, the interval is
2 minutes ring for 15 seconds, ring twice, when the alarm rings, press any key to close the snooze, this key function is not executed
Four button description
4.1 MODE key
4.1.1 Short Press to Switch Between Clock and Alarm Mode in Non-Set Mode.
4.1.2 Long press in the Clock and Alarm mode for 2 seconds to enter the Setting state.
4.1.3 Confirm the Settings in the Settings state.
4.2 ADJ Key
4.2.1 To view the date in Clock Mode, press ADJ.
4.2.2 In Alarm Mode, press ADJ to turn on the alarm. Enable snooze function; Turn on the hour signal; Turn off the alarm; Turn off the snooze; Turn on the alarm; Turn on the snooze; At the same time, turn off the alarm, snooze, and strike the hour
4.2.3 Setting This Parameter Specifies the current value.
4.3 MEMO Button
Press this key to switch between the highest (MAX) temperature (humidity), the lowest (MIN) temperature (humidity), and the current temperature (humidity). Long press this key for 2 seconds at the highest (humidity) or the lowest (humidity) temperature to clear the highest (humidity) and the lowest (humidity) temperature at the same time
4.4 C/F key
Press this key to toggle the temperature between degrees Celsius and Fahrenheit
4.5 RESET Key
Press this key to reset (equivalent to power on)
5. Instrument maintenance
The instrument is precision instrument, users please do not change the circuit; Please pay attention to waterproof, dustproof and anti-fall