Shenzhen Selen Technology Co., Ltd

Consultation Hotline 19925361696 19925366196

Shenzhen Selen Technology Co., Ltd
CH | EN
Shenzhen Selen Technology Co., Ltd

Consultation Hotline 19925361696 19925366196

Shenzhen Selen Technology Co., Ltd

Your Position:Home > Products Center > 胜利仪器 > VICTOR 4100 Double Clamp Digital Phase Voltammeter

  • VICTOR 4100 Double Clamp Digital Phase Voltammeter

    Model:VICTOR 4100

    Brand:胜利仪器

    Introduction:A multifunctional instrument specially designed for field testing, with high precision, high stability, low power consumption, easy to use and so on

  • Technical specifications

    Work energy

    Phase, AC current, AC voltage, AC leakage current, phase sequence test directly; Transformer group, inductive, capacitive circuit discrimination; Power factor, power indirect test

    Electricity source

    DC9V Alkaline dry battery (1.5V AA×6)

    Work consumption

    Turn on the backlight at approximately 35mA, continuous operation of the battery for about 40 hours

    Turn off the backlight The meter consumes about 5mA, and the battery works continuously for about 300 hours

    Disy mode

    LCD disy, blue screen backlight function, suitable for dim ces

    LCD size

    70mm×62mm

    LCD disy domain

    64mm×54mm

    Instrument size

    Length and width: 196mm×92mm×54mm

    Mouth size

    φ7.5mm×13mm

    Sampling rate

    About 3 times per second

    Quantity The process of

    Ac voltage: 0~20V/200V/600V

    Ac current: 0~200mA/2A/20A

    Phase: 0~360°

    MeasureQuantity相位时被Measure信号的幅值范围

    Measure U1-U2 phase: 30V ~ 600V

    Measure I1-I2 phase: 10mA ~ 20.00A

    Measure U1-I2 or I1-U2 phase: 10V ~ 600V,10mA ~ 20.00A

    Data retention

    Measure试中按 The HOLD key holds the data, and the "DH" symbol is disyed

    Automatic shutdown

    开机About 15分钟后,仪表Automatic shutdown,以降低Battery消耗

    电压检Measure

    When the battery voltage is lower than At 7.2V, the battery low voltage symbol is disyed to remind you to rece the battery

    仪表质Quantity

    HostAbout 550g(带Battery),表钳About170g×2,Measure试线About250g

    Measure试线长度

    1.5m

    Current clamp wire length

    2m

    Working temperature and humidity

    -10℃ ~ 40℃; 80percentRh below

    Storage temperature and humidity

    -10℃ ~ 60℃; 70percentRh below

    Input impedance

    Measure试电压各档Input impedance为: 2MΩ

    Measure U1U2相位时电压Input impedance为:40kΩ

    Resistant to Press

    仪表上盖与Battery盖板螺钉之间Resistant to受 The 2000V/50Hz sine-wave AC voltage lasts for 1 minute

    Absolutely Edge

    Between the instrument line and the housing, between the two voltage input terminals ≥10MΩ

    The knot Structure

    双重Absolutely缘


    Packing list

    Host

    One

    Instrument box

    1

    Current clamp

    Two

    Measure试线

    4 (red and black 2)

    Battery

    6节(碱性干Battery:1.5V AA)

    Specification, warranty card, certificate of conformity

    1 serving


    Tel:19925366196
    Mobile:19925366196    
               19925361696    

    Address:1903H10, Zhuoyue Building, No. 98 Fuhua 1st Road, Futian District, Shenzhen

    Email: info@selen.net.cn

    粤ICP备2023022766号