Electricity source

DC 3.7V rechargeable lithium battery,USB charging interface, continuous operation for about 10 hours

Nuclear phase pattern

Satellite second pulse accurate mode, satellite timing mode, ordinary mode

Transmission mode

315MHz,433MHz wireless transmission

Nuclear phase distance

The distance of satellite timing mode is not limited, up to 500km or more

普通Nuclear phase pattern距离1600m

Disy mode

3.5 "true color LCD disy

Measuring range

Nuclear phase voltage level: AC 10V ~ 550kV

Phase: 0° ~ 360°

Frequency: 45Hz to 75Hz

Resolution power

1°;0.1Hz

Precision (23℃±5℃,80percentRH below)

Satellite timing nuclear phase: ≤±5°

Common nuclear phase: ≤±10°

Frequency: ≤±2Hz

Phase differentiation

The real-time phase Angle difference disyed by XY receivers is in phase from 0° to 30°. The real-time phase Angle difference between XY and XY receivers is different from 90° ~ 120° or 210° ~ 270°

语音Work能

同相、异相、X信号正常、Y信号正常等语音Work能

Duration nuclear phase time

卫星授时成Work后,若无卫星信号可持续核相30分钟,满足地下室、矿井下核相

Insulation rod size

After stretching, the length is about 5m. After contraction, the length is about 1m(5 knots)

Nuclear phase mode

Contact nuclear phase: 35kV and below bare wires, or 110kV and below the safe insulation skin of the conductor directly contact the nuclear phase (with insulation rod operation)

Non-contact core phase: bare conductor above 35kV, or line above 110kV adopts non-contact core phase (with insulated rod operation)

Electrical instruction

Detector "toot toot toot" beep

Shift gears

Automatic shift

Sampling rate

2 times per second

First search time

The first startup takes about 3 minutes to search the satellite, the second startup takes about 30 seconds after the startup, and the subsequent hot startup takes about 1 second. When the satellite is searched, the antenna of the receiver is in the sky

Timing accuracy

Is less than 30nS

Instrument size

Detector: Length width and thickness 145mm×60mm×48mm

Receiver: Length and width 250mm×100mm×40mm

Backlight control

Press the up and down arrow keys to adjust the backlight brightness

Induction intensity control

According to the intensity of the induced electric field is different, the detector can automatically control the amplification, which is convenient for the nuclear phase in dense ces

Data retention

Press the HOLD key to HOLD data in test mode, then press the Hold key to cancel hold

退出Work能

按ESC键退出当前Work能界面,返回上级目录

Data retrieval

按ENTER进入Data retrieval模式后,按箭头键翻阅存数据

Star search directions

The "----" symbol is disyed dynamically when searching for satellites

Automatic shutdown

开机约15分钟后,仪表Automatic shutdown,以降低电池消耗

Rated current

Detector: 35mA max; Receiver: 300mA max

电池电压

When the battery voltage is lower than 3.2V: the detector power indicator blinks slowly to remind you to charge; Receiver battery low voltage symbol disy, remind to charge

Instrument quality

Detector: 205g(including battery)

Receiver: 395g(including battery)

Insulation rod: 1.45kg

Total mass: 9.8kg(including instrument box)

Working temperature and humidity

-10℃ ~ 40℃; 80percentRh below

Storage temperature and humidity

-10℃ ~ 60℃; 70percentRh below

Interference

No extra-strong electromagnetic field; No 433MHz,315MHz simultaneous interference

Insulation strength

Insulation rod: AC 110kV/rms(5 sections of insulation rod after stretching, between the ends)

Detector: 2000V/rms(between insulated rod connector and detector top)

Receiver: 2000V/rms(before the front and rear ends of the housing)

Structure

Drip-proof type II,IP63

Suitable for safety rules

GB13398-92, GB31.1-311.6-8,3DL408-91 standard and the national newly issued power industry standard "1kV ~ 35kV portable nuclear phaser general technical conditions DL/T971-2005" requirements

Comply with IEC61481-A2:2004; IEC 61243-1 ed.2:2003 Standard