VICTOR9000B wireless high and low voltage clamp ammeter clamp head and guide area innovative integrated design, to ensure year-round uninterrupted testing of high precision, high reliability, high stability
VICTOR9000B wireless high and low voltage clamp ammeter connected to all 5 sections of insulation rod, can be used under 60KV high voltage line current measurement, online current measurement, but also has the peak maintenance, data retention, data storage, infrared transmission and other functions, its special clamp ammeter by pressing or pulling out the insulation rod can be convenient to clamp or withdraw the measured wire, fast and wide Widely used in substations, power nts, industrial and mining enterprises, detection stations, electrical maintenance departments for current detection and field electrical work. It can also be used as a high and low voltage ratio tester, that is, to measure the high and low voltage current of the primary circuit and the secondary circuit respectively, and then manually calculate to get the high and low voltage ratio. Insulation rod is light, with moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, telescopic and so on
Technical specifications
| Work energy | High voltage AC current measurement, low voltage AC current, leakage current measurement, online AC current monitoring |
| Electricity source | DC6V Alkaline dry battery (1.5V AAA×4) |
| Test mode | Forceps CT, integral mode |
| Transmission mode | Wireless transmission, linear transmission of the maximum distance of about 30m |
| Disy mode | 4 - bit LCD disy, backlight function, suitable for dim ces |
| LCD size | 47mm×28.5mm |
| Instrument size | Width height thickness: 76mm×255mm×31mm |
| Mouth size | φ48mm |
| Sampling rate | About 2 times/second |
| Measuring range | 0.1mA to 1000A (automatic 50/60Hz) |
| Resolution rate | 0.1mA |
| Shift gears | 0.1mA ~ 1000A automatic shift |
Test accuracy (23℃±5℃,80percentRH below) |
0.1mA～299mA: ±1%±3dgt |
| 0.30A～9.99A: ±1.5%±5dgt | |
| 10.0A～199.9A: ±2%±5dgt | |
| 200A～399A: ±2.5%±5dgt | |
| 400A～600A: ±3%±5dgt | |
| 601A～1000A: ±4%±5dgt | |
| Line voltage | Line test below 60KV (operation with 5 insulated rods) |
| Data storage | Group 99, "MEM" symbol indicates in the stored procedure, "FULL" symbol blinking indicates that the storage is full |
| PEAK保持 | Automatically HOLD the test value of the height. Generally, long press the hold key until the PEAK light is on in the test mode, that is, the PEAK hold function is enabled |
| Data retention | Usually press the HOLD key to HOLD data in test mode, and the "hold" symbol is disyed |
| Data retrieval | The "MR" symbol indicates that the stored data can be flipped up and down |
| Overflow disy | Overrange overflow function: "OLA" symbol disy |
| No signal indication | When the receiver does not receive the transmission signal, the "no --" symbol is disyed dynamically |
| Automatic shutdown | 开机约15分钟后,仪表Automatic shutdown,以降低电池消耗 |
| 电池电压 | When the battery voltage is lower than 4.8V, the battery low voltage symbol is disyed to remind you to rece the battery |
| Instrument quality | Detector: about 335g (including battery), total weight of instrument: about 2.5Kg (including insulation rod and battery) |
| Working temperature and humidity | -25℃ ~ 40℃; 80percentRh below |
| Storage temperature and humidity | -10℃ ~ 60℃; 70percentRh below |
| Insulation rod size | φ32mm,1m/ section (5 sections) |
| Insulation strength | AC 100kV/rms(Section 5 between insulation rod and high voltage current clamp core) |
| Structure | Drip proof Type II |
