VICTOR9001无线高低压电压表由采集器、绝缘杆、接收器、接地线、接地针等组成,用于无线测试0～65kV的电压（对地相电压）,也可以用于高压验电,带电压指示.电压测量采用接触式方式,采集器连接好5节绝缘杆和金属探钩后后挂在线路上测试,接触测试裸导线电压不能过65kV.本仪器还配有接地线、接地针,测试高压电压时也可以连接地线和接地针直接对地测试电压,连接接地线测试的对地电压与不连接接地线悬空测试的对地电压,相互误差不过2%.本仪器还具有高压验电功能,过65kV的裸导线采用非接触式验电, 采集器逐渐靠近线路即可,有电会发出“嘟--嘟--嘟--” 蜂鸣声.
Work energy
High and low voltage test, frequency test, electricity test
Electricity source
Collector: DC 3.7V rechargeable lithium battery, fully charged and continuously working for about 20 hours
Measurement mode
Test voltage: contact test, bare wire contact test below 65kV;
Transmission mode
433MHz wireless transmission
Transmission distance
The straight-line distance is about 100m
Disy mode
3.5 "true color LCD
Available cable diameter
φ70mm (when using metal probe hook)
Pressure measuring range
Voltage: 0 ~ 65kV (50Hz)
Frequency: 45.0Hz to 55.0Hz
Resolution rate
1V（100V～2000V）
0.01kV（2.00kV～20.00kV）
0.1kV（20.0kV～65.0kV）
0.1Hz
Voltage accuracy
±5percent (0.1kV ~ 65.0kV,23℃-25℃,70percentRh below)
Frequency accuracy
±2Hz（0.1kV～65.0kV）
Insulation rod length
Connect the total length of 4.2m(4 sections 0.9 m,1 section 0.6 m)
Ground cable length
7m
Data storage
Group 9999
Sampling rate
2 times per second
Instrument size
Collector: Length width thickness 275mm x 105mm x 52mm
Line voltage
The bare wire below 65kV can be measured directly, and the metal hook part of the collector can hook the bare wire stably. When inspecting electricity, the bare conductor of more than 65KV is not in contact. The bare conductor of more than kV can not be contacted. The conductor of 110kV with insulation can be contacted
Data retention
In data measurement mode, press
HOLD
Key to hold data, and then press
HOLD
Key Cancel hold
Exit function
Press
ESC
Key exit the current function interface, return to the upper directory
Data retrieval
进入Data retrieval模式后,
Arrow
Key to browse the stored data
No signal indication
The "----" symbol is disyed dynamically when the receiver does not receive the transmitted signal
Automatic shutdown
开机约15分钟后,仪表Automatic shutdown,以降低电池消耗
Battery voltage
当Battery voltage过低时,Battery voltage低符号显示,提醒充电
Instrument quality
Collector: 230g(including battery)
Working temperature and humidity
-10℃ ~ 40℃; 70percentRh below
Storage temperature and humidity
-10℃ ~ 60℃; 70percentRh below
Wireless interference
No interference of 433MHz same-frequency signal
Insulation strength
Insulation rod: AC 110kV/rms(insulation rod all connected between the two ends)
Structure
Collector anti-drip type II
The receiver adopts a 3.5 inch true color LCD screen to receive test data wirelessly. The linear distance is about 100 meters, and the detection voltage frequency is disyed at the same time, which is intuitive and clear. The insulation rod is portable, has the characteristics of moisture proof, high temperature resistance, impact resistance, high insulation and easy assembly. Widely used with substations, power stations, railway departments, fire departments, industrial and mining enterprises as well as monitoring stations, electrical maintenance departments for electrical detection and field electric operations
Technical specifications
Receiver: DC 8.4V rechargeable lithium battery, fully charged continuous operation for about 8 hours
Electrical test: non-contact electrical test, over 65kV bare wire non-contact test
Receiver: Length and width 250mm×100mm×45mm
Receiver: 410g(including battery)
Total mass: 3.5kg(including insulated rod, grounding wire and battery)
Collector: 2000V/rms(between two ends of the shell)
Receiver: 2000V/rms(before the front and rear ends of the housing)
