Product Introduction :
The VICTOR 6100 three-phase watt-hour Meter Field Calibrator is a portable device developed specifically for field check sheets, three-phase active and reactive power induction and electronic watt-hour meters, and a variety of other electrical instruments. This instrument is mainly used to verify the error of the electricity meter, check whether the wiring of the metering device is correct, detect the ratio and polarity of the current transformer used for measurement, and measure the power quality of the user (including voltage harmonics, current harmonics, total harmonic distortion, voltage balance, etc.)
Application field:
Widely used in electric power, metallurgy, chemical industry, tobacco, textile, railway, ship, property and other industries. It provides a convenient solution for the power metering department to check the error of the meter and the power inspection department to check the illegal behavior of stealing electricity without dismantling the meter or power failure
Product Features:
l采用5寸TFT液晶屏（分辨率 800×480） .
l, English shows.
l Accurate measurement of voltage, current, active power, reactive power, phase Angle, power factor, frequency and other electrical parameters, can be used to verify three-phase three-wire, three-phase four-wire, single-phase active/reactive watt-hour meter
l测量低压 CT primary current and secondary current, ratio and Angle difference .
l直观显示三相Voltage、Electricity流的矢量图,具有 144 kinds of error connection discrimination (three - phase three - wire 48, three - phase four - wire 96) function, and text accurately and clearly describe the error information According to the connection discrimination, give the corresponding correction coefficient
l Support photoelectric, manual, pulse, three ways to check the electricity meter.
l Support the word test of the meter, investigate and punish the means of stealing electricity by changing the namete and word wheel
l can be connected to the bar code scanning gun, directly scan the table ID and user information .
l can disy the real-time waveform of voltage and current of each phase, used to judge whether the quality of voltage and current is good
l可进行 2 ~ 50 harmonic detection, showing the content or amplitude of each harmonic , automatically calculate the total harmonic distortion degree, and through the histogram form disy
l can detect and disy the three-phase unbalance.
l可存贮 9999 historical records can be exported by USB flash drive or uploaded to PC through communication port
lElectricity流、Voltage、有功功率、有功Electricity能Accuracy： 0.0 Level 5.
l提供Electricity源适配器和Electricity池供Electricity二种模式,内置锂Electricity池可连续工作 More than 8 hours.
l具有 RS232,USB Host,USB Device,LAN interface,WiFi(optional) and other communication interfaces.
l Built-in micro printer, can print test data on site
Technical specifications :
Basic function |
VICTOR 6100 |
|||||
Range of the clamp transformer (AC input) (Optional as required. 1 size) |
10A |
30A |
100A |
500A |
1000A |
2000A |
Custom sensor function, customers can choose other range of clamp transformers |
||||||
Direct output range of current ( Ac/DC ) |
The range of 0～10A , Automatic gear 1A、5A、10A |
|||||
Voltage EnterThe range of （Ac/DC） |
The range of 0～ 75 0V , Automatic Gear position 57.7V、100V、220V、380V、 75 0V |
|||||
Measurement check Accuracy |
Electricity Press: ±0.0 5％ |
|||||
Electricity Stream: Direct input ±0.0 5％ , Clamp type transformer ±0. 5 ％ |
||||||
Active power: Direct input ±0.0 5％ , Clamp type transformer ±0. 5 ％ |
||||||
Reactive power: Direct input ±0.3 ％ , Clamp type transformer ± 1.0 ％ |
||||||
有功Electricity能：直接Enter ±0.0 5％ , Clamp type transformer ±0. 5 ％ |
||||||
无功Electricity能：直接Enter ±0.3 ％ , Clamp type transformer ± 1 . 0 ％ |
||||||
Frequency measurement |
The scope of ： 10 ～ 100 Hz ; Resolution ： 0.001Hz; Accuracy： ±0.01Hz |
|||||
Phase measurement |
The scope of ： 0～ 359.999 ° ; Accuracy ： ±0. 05 ° |
|||||
Electricity能Pulse Enter |
Maximum Pulse Enter Frequency 1kHz; Can be assumed 常数The scope of 1~100000; Can be assumed分频系数; 1~9999 |
|||||
Harmonic measurement （ 2 ~ 50 times ） |
基波VoltageElectricity流幅值 Accuracy ±0. 2 ％ , 基波VoltageElectricity流相位差 Accuracy ±0. 1 ° , 谐波VoltageElectricity流含有率 Accuracy ±0.2％ , Total harmonic distortion ±0.2％ |
|||||
Three-phase unbalance degree |
±0.2％ |
|||||
