Shenzhen Selen Technology Co., Ltd

Consultation Hotline 19925361696 19925366196

Shenzhen Selen Technology Co., Ltd
CH | EN
Shenzhen Selen Technology Co., Ltd

Consultation Hotline 19925361696 19925366196

Shenzhen Selen Technology Co., Ltd

Your Position:Home > Products Center > 优利德 > Yuride UT620C DC low resistance meter

  • Yuride UT620C DC low resistance meter

    Model:UT620C

    Brand:优利德

    Introduction:UT620C digital DC low resistance meter is mainly used to measure wire resistance of cables, contact resistance of switches, connectors, relays, resistance of coils, motors, transformer windings, and connection resistance test between metal components of equipment enclosures, lightning belts, ground beams, structures, cabinets, steel bars, water pipes, Windows, guardrail, radiators, assembly lines and other objects. Widely used in telecommunications, electric power, meteorological, computer rooms, oil fields, power distribution lines, tower transmission lines, gas stations, factories grounding network, lightning rods, etc.

  • The highest accuracy is 0.01percent;
    Direct shift without line change;

    Built-in rechargeable lithium battery, long service life;

    500 sets of data can be saved, read, deleted;

    Using microprocessor technology, four-wire method test, safe, precise and reliable

    USB data transmission (no driver installation), and PC two-way data exchange;

    Resistance value: 1mΩ,10mΩ,100mΩ,1Ω,10Ω,100Ω,1kΩ,10kΩ,100kΩ

    Type number UT620C
    Function Mainly used for measuring cable wire resistance, switches, connectors, contact resistance of relays, coil, motor, transformer winding resistance and metal riveting resistance, resistance test between metal components, low value resistance test, resistance test between ground grid pole connecting conductor, contact resistance test
    Resistance range 0.001mΩ~300.0KΩ
    Resolution rate 1uΩ
    Precision ±0.1 percentfswithin 18℃~28℃, under 70percentrh :±0.1percentFS±20dgt
    Data storage 500 groups, "MEM" storage indicator, disy "FULL" symbol indicates that the storage is full
    Detection method Four-wire method test
    Test the current ≥1A
    Open-circuit voltage ≤4.2V
    Work rate Measuring power ≤8W
    Electricity source DC 3.7V 2000mAh large capacity lithium battery
    Backlight Controllable grey screen backlight, suitable for use in dim ces
    Disy mode LCD disy, grey screen backlight
    Test line length About 70cm, red and black 1
    Measure the time About 2 times/second
    USB interface 具有micro USB interface
    Data storage 500 groups, "MEM" storage indicator, disy "FULL" symbol indicates that the storage is full
    Data retrieval Data retrievalFunction:“MR”符号显示
    Overflow disy 量程溢出Function:“OL”符号显示
    Battery voltage 电池电量实时显示,提示Battery voltage低时需要及时充电
    Automatic shutdown “APO”指示,开机 15 分钟后Automatic shutdown
    Power consumption Standby: about 100mA (backlight off)
    开机开背光: 约 105mA
    Measurement: 2A Max
    Working temperature and humidity -10℃ ~ 50℃; 70percentrh below
    Storage temperature and humidity -20℃ ~ 60℃; 70percentrh below
    Overload protection C1-C2 P1-P2各端口间AC 220V/0.0001秒,Overload protection后,需要重启仪表才能正常测试
    Insulation resistance More than 10MΩ (500V between the circuit and the shell)
    Pressure resistance AC 3700V/rms(between circuit and housing)
    Electromagnetic properties IEC61010-4-3, wireless frequency electromagnetic field ≤1V/m
    Pressure resistance AC 3700V/rms(between circuit and housing)


    Tel:19925366196
    Mobile:19925366196    
               19925361696    

    Address:1903H10, Zhuoyue Building, No. 98 Fuhua 1st Road, Futian District, Shenzhen

    Email: info@selen.net.cn

    粤ICP备2023022766号