Cable recognition (recognition and decoding of pulse current signals)
Voltage test AC 0.01V to 600V(50Hz/60Hz)
Military tool kit pressure resistance 200kg
Flexible coil receiving clamp φ200mm
Color grating dynamic indicator
The electronic dial is beautiful and intuitive
Rechargeable lithium battery
PSK technology, strong anti-interference ability
Pulse current: 30mA Max
Pulse voltage: 500V
Pulse width: 2mS
| Model number | UT263A (Transmitter Specification) |
|
Model number | UT263A (Receiver Specification) |
| Work energy | Generate pulse code current signal; Disy the remaining battery voltage | Work energy | Cable recognition (recognition and decoding of pulse current signals);交流电压测量 | |
| Electricity source | 11.1V大容量Rechargeable lithium battery,充满电连续工作约8小时 | Electricity source | 7.4V大容量Rechargeable lithium battery,USBCharging interface,充满工作约8小时 | |
| Disy mode | Large LCD disys the remaining battery voltage in real time | Rated current | About 180mA max | |
| Pulse voltage | 500V | Disy mode | 3.5 "true color LCD disy, color electronic dial indicator | |
| Pulse current | Max. 30A (depending on the resistance of the loop) | Receiver size | Length width and thickness 207mm×101mm×45mm | |
| Pulse frequency | 1 time/second | Detection range | The coil can detect pulse signal with loop resistance of 0Ω ~ 2kΩ; When the resistance of the detection loop is 2kΩ, ensure that the battery power of the transmitter is more than 10V | |
| Pulse width | 2ms | |||
| Send a signal | 棒图动态显示Send a signal | Voltage accuracy | ±1%±1dgt | |
| Test line length | 3 meters with alligator clip, 1 each red and black | Detection rate | 约1 time/second | |
| Operating temperature | -10℃～40℃ | Charging device | 9V DC charger | |
| The foot inch | 320mm×275mm×145mm | Charging interface | USBCharging interface | |
| Instrument quality | Transmitter: 2.5kg, total mass: 3.3kg (including receiver) | |||
| Working temperature and humidity | -10℃ ~ 40℃; 80percentRh below | |||
| Size of outer packing | Length width height 400mm×245mm×335mm | Storage temperature and humidity | -10℃~50℃,≤ 95% RH, no condensation | |
| Pressure resistance | Transmitter adopts integrated special tool box type, box can withstand about 200kg pressure | Voltage range | AC 0.01V～600V(50Hz/60Hz) | |
| Charging device | 12.6V DC charger | Receiver quality | Receiver: 370g(with battery) Current clamp: 172g | |
| Charging interface | 囿形Charging interface,DC标识 | Backlight control | Press the up and down arrow keys to adjust the LCD backlight brightness | |
| Battery power | At the low end of the series 9.65V, the battery low symbol disys. At the low end of the series 9.5V, the device automatically shuts down | Identification signal | Color raster dynamic disy signal strength | |
| LCD disy domain | 124mm×67mm | Cable recognition work | Green grating clockwise dynamic indicator | |
| LCD size | 128mm×75mm | Non-target cable | Red grating counterclockwise dynamic indication | |
| Backlight control | Yes, white backlight | Flexible coil | Length about 630mm, line diameter 6 mm or 12.5mm | |
| Pressure resistance | The transmitter is designed as an integrated military tool box with a pressure of about 200kg | Inside diameter of coil | φ200mm | |
| Pressure resistance | AC 3700V/rms(before top and bottom of instrument case) | The absolute fate of | ≥100MΩ-- between instrument line and sheath housing | |
| Refer to safety rules | IEC61010-1(CAT Ⅲ 300V,CAT IV 150V, pollution level 2) | Suitable for safety rules | IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326, |
