UT195M is a full-featured, high quality, high reliability, high safety, three-proof multimeter with waterproof IP65, dust-proof, fall-resistant, large-screen disy. With the motor phase sequence of the phase rotation measurement, can identify the motor rotation phase sequence and the phase of the power supply, and can be used for variable frequency voltage conditions measurement. The product adopts dual-mode ADC arithmetic chip, the sampling rate is up to 5 times/s, and multi-function LCD disy is realized through MCU control. The product is equipped with full-function anti-error test protection, which can withstand 8000V dangerous transient pulse (lightning strike) voltage caused by load switching and industrial circuit failure; LCD uses automatic backlight starting mode, through the micro-control chip to automatically identify the intensity of the luminosity; Whether you operate the instrument in light or dark conditions, you will get an ideal visual horizon
产品特性及特点:
With IP65 dust-proof and waterproof function, can withstand 2m drop impact
6000 word LCD large screen disy, sampling rate: 5 times/second
True effective value, can accurately measure the nonlinear load
Maximum/minimum value, data retention, relative measurement, can exclude resistance measurement of the test wire interference
Flashlight lighting function, can work in the dark environment
LCD automatic backlight, which automatically recognizes luminosity through MCU, can effectively read even in low light position (can be turned off)
LoZ voltage measurement to provide a low impedance throughout the conductor circuit for more accurate measurements
Three-phase phase sequence phase rotation measurement, can identify MOTOR rotation phase sequence and power phase, and can be used for variable frequency voltage conditions measurement
Manual and automatic range selection to achieve maximum flexibility
Diode test, circuit on - off, low power prompt and automatic shutdown function
Input protection conforms to CAT III 1000V and CATⅣ600V, and can withstand transient pulse (lightning strike) voltages over 10000V, reducing the risk of surges and shocks
Instruments comply with CE European Community standard
基本功能 | 量程 | 基本精度 |
UT195M | ||
Dc voltage (V) | 600mV~1000V | ±(0.5%+3) |
Ac voltage (V) | 600mV~750V | ±(0.7%+3) |
LoZ ACV | 600.0V | ±(2.0%+3) |
Direct current (A) | 600.0μA~20A | ±(0.8%+3) |
Ac current (A) | 600.0μA~20A | ±(1.0%+3) |
Resistance (Ω) | 600.0Ω~60.00MΩ | ±(0.8%+2) |
Capacitance CAP | 6.000nF~60.00mF | ±(3%+5) |
Frequency | 60.00Hz~40.00MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | N/A |
The temperature is ℃ | -40~1000℃ | ±(1.5%+4℃) |
Temperature: ℉ | -40~1832℉ | ±(2.0%+5℉) |
特殊功能 | ||
Disy digit |
|
6000 |
Disy interface (HTN) |
|
Single disy |
Measure the digital conversion rate | Times/second | Three times |
Measure the analog bar conversion rate | Times/second |
|
Analog bar | Paragraph 31 |
|
True RMS value (True RMS) |
|
√ |
Ac voltage frequency response |
|
45~1KHz |
Ac current frequency response |
|
45~1KHz |
Motor phase sequence measurement | 600.0V | √ |
Low-pass filtering test | √(1kHz 3db attenuation) |
|
二极管/通断测试 |
|
3V |
Automatic/manual range | √ | |
Automatic shutdown | √ | |
On or off the buzzer | √ | |
Low voltage disy | √ | |
The number holds | √ | |
Maximum value/minimum value (Max/Min) | √ | |
Function SELECT (--) | √ | |
Flashlight | √ | |
Automatic backlight | √ | |
Operating temperature | 0℃~40℃ | |
Drop resistance test 2m | √ | |
Protection level | IP65 | |
一般特征 | ||
Power supply | 9V 6F22 carbon zinc battery or 6LR61 alkaline battery | |
LCD size | 66*51mm | |
Fuselage color | Red gray | |
Fuselage weight | 473g | |
Fuselage size | 195*95*58mm | |
Standard parts | Pen, battery, cloth bag, point temperature probe | |
Standard packing | Color boxes, manuals, warranty cards | |
Standard packing数量 | 6 | |
Standard packing尺寸 | 580*375*215mm | |
Standard packing箱毛重 |
|