Product Description:
全新升级的JK3000It isARM微处理器控制的多通道温度记录仪,采用4.3英寸彩色Show多路并行测试,多通道温度记录仪同时对多路温度进行采集、报警、和通讯传输.
JK3000 Series sampling the most advanced test principle, enabling temperature test resolution to 0.1 degrees. Has a wide range of adaptability, support K/J/T type thermocouple. The test range is from -200℃ to 1800℃.
多通道温度记录仪标配RS232接口可以直接将数据上传到PC上 还拥There isUSB接口在不方便与PC连接时可以将测量的数据直接保存到U盘中在需要时再把数据转存到PC上.
And can accept module combination. Whether you need only a few simple data recording channels, or hundreds of performance channels, and provide free communication through PC software can easily achieve data acquisition, analysis and printing
With strong anti-vibration housing, can work in harsh environment. Fully isolated digital and analog signals,JK3000 standard with U disk interface, support real-time data storage. At the same time test, at the same time disy instrument curve description way can be arbitrarily extended,
Permanent upgrade.
Product Features:
1: large screen color LCD (4.3 ") measurement window disys all parameters
2: The operation interface is highly user-friendly, simple and clear, no noise when working
3: 8,16,24 (32) channel data real-time high-speed acquisition, simultaneously disyed on the same interface
4: ARM microprocessor using patch integrated circuit, so that the stability and accuracy has been further improved
5: The volume of the instrument is reduced and the weight is reduced
6: The channel module is inserted and removed freely.
7: USB interface, the collected data can be stored in the U disk, through the computer monitoring software to collect the data or U disk storage data generated temperature curve analysis, export (Excel) saving, printing, especially suitable for users who are not convenient to connect the computer
8: instrument temperature curve disy.
9: Computer communication software (free gift, free upgrade) : collect, store, print temperature data and draw temperature curve. Easy for users to query, analysis data.
10: thermocouple signal input.
11: This machine also has date and time, power still work
12: Communication interface: equipped with RS232 communication head or USB communication head and computer communication or RS485, the longest communication distance up to 1000 meters, a computer can be connected to multiple temperature tester (monitoring multiple data at the same time)
Technical parameters:
Model number |
JK3000 multichannel data recorder |
Input type |
Thermocouple: J/K/T |
Measuring range |
Temperature range: J - K - T - type
|
Number of channels |
8路16路24路 Route 3240路48路64路（外扩展模块JK408） |
Show |
4.3 "TFT color screen |
Show分辨率 |
0.1℃ |
U disk storage |
There is |
Withstand voltage |
Between the input loop and the internal loop: 300VAC/1 min between the analog input channel: 100VAC/1 min |
Scanning speed |
100ms/通道,并行测试（8-64通道均为1s） |
Internal storage |
There is |
Curve delineation |
There is |
Communication interface |
RS232 or RS485 |
Supporting software |
2015 version V1.3 software |
单屏Show |
Route 32 |
Temperature correction |
There is |
Other functions |
Clock function Calendar function |
Terminal type |
Plug and pull terminal |
Allow
|
1, power supply: AC 220V±10percent,50Hz±2percent;
|
Overall dimensions |
(Width × height × depth) Shelf size (mm):215(w)*88(H)*335(D)
|
JK4000/JK3000 Points for attention:
▶ The communication software is installed on a non-system disk .
▶ If Instrument It is usb通讯口需要安装 usb通讯驱动 （www.jk17.com 网站下载UT232 驱动) .
▶ After selecting the serial port on the communication Settings screen, you need to turn off -- for the first connection Software, again Restart the software (Note: do not press to reconnect)
▶ If换了电脑的 u口也需要在通讯设置界面重设 Serial port number, turn off Software ,再Restart the software(Note: do not press to reconnect)
▶ 连接后先看左下角It is否It is已连接提示 , There is已连接提示就可以去测量Show界面Click Start .
▶ After stopping the sampled historical data, go to the file interface to set the saving path Look in, www.jk17.com上产品中心里There is对应的视频可以看下 , 也可以下载电子档说明书There is操作步骤 .
▶ JK 4000 /JK 3000系列使用 u盘的话直接插就可以
▶ Instrument识别到 u盘自动往里面存 , Just pull it out when you don't need it
▶ U It is suggested that 16 G The following requirements fat32格式
▶ Plug in U Disk identification ：U The light next to the disk will flicker , 屏幕右下角There is u-on的提示 , 屏幕右上角There is u＝ 0000数字递增的现象
▶ Pull it out U 盘里面正常会There is时间数字名称的表格文件 , You can try it for a short time
▶ JK 4000 /JK 3000系列的Software上储存的数据在文件界面里的保存路径中
▶ 安装Software后修改下保存路径 , In order to find
▶ Click Start , 结束后Software自动保存下一个表格数据
▶ Then open can click the file option in the view or test interface in the test report in the load to see
▶ The test report can be saved word格式文件或者直连打印
