Product Description:

JK5506 analog battery has charge and discharge function, can simulate 20V 10A battery, the maximum charge is 20V 10A, the maximum discharge is 20V 10A, and can be used as a six-bit half ammeter to test the static current of PCBA

The device is mainly used for the development and test of mobile power supply, Bluetooth headset, Bluetooth speaker and other battery-powered products or products with batteries. It can also be used as a common adjustable power supply. Its output voltage and input, output

The output current protection value can be set. In PC communication mode, it can set the dynamic voltage continuously changing within the specified time, and can visually disy the curve relationship between voltage and current changing with time in the test process

Product application:

Portable battery powered product testing
Mobile power supply test
Battery protection te test
Battery testing
LED test
Power amplifier test
DC/DC converter test
Support fast charging

Fast charging has become the development trend of mobile phones, tablets and other electronic products, and the major electronic manufacturers have also listed fast charging as a test focus

JK5506 battery simulator current output up to 10A, fully meet the market mainstream low-voltage, high-current fast charge solution test requirements

Functional features:
(1) Can detect PCBA or finished standby current, support to μA current;
(2) 6 sets of preset voltage for easy debugging;
(3) can be automatically switched to mA when the current is low;
(4) High disy resolution, voltage 1mV, current 1μA;
(5) can be set storage 6 groups of voltage, support fast switching;
(6) 3.5 inch LCD touch screen, supporting direct parameter input, easy operation;
(7) charge and discharge stepless conversion;
(8) with serial communication interface (baud rate 115200);
(9) can be controlled by a PC, and can set the continuous change of dynamic voltage;
(10) can directly disy the curve relationship between voltage and current changes with time in the test process;
(11) Special customized large current 10A double crocodile head wire.

JK5506模拟Battery testing仪
The serial number is	Type	Project	Parameter
1	Output	Voltage	0 - 20V 定制（0~ 60V ）
		Current	0 - 10A 定制（0 ~ 5A）
		Power	Max200W
2	Enter	Voltage	0.2~20V
		Current	0.1~10V/0~10A 10.01~20V /0~5A
		Power	Max100W
3	Set the resolution	Voltage	1mV:0.1~5V 5mV: 5.01~20V
		Current	1mA
4	Set the accuracy	Voltage	0~5V：0.05%+2mV;
			5.01~20V：0.05%+10mV
5	Read back resolution	Voltage	U<5V：1mV
			U≥5V：5mV
		Current	I<10mA：1uA
			I≥10mA：1mA
6	Read back accuracy	Voltage	U<5V：0.05%+2mV
			U≥5V：0.05%+10mV
		Current	I<10mA：0.15%+5uA
			10mA≤I<5.0A：0.15%+4mA
			I≥5A：0.15%+6mA
7	Load adjustment rate	Voltage	<0.1%
8	Power adjustment rate	Voltage	<0.1%
9	Ripple	Voltage	100mVp-p

Charge curve 
被测设备对电池Charge时,随着电池电量的增加（减少）,电池正负极之间的Voltage也将逐步升高（降低）

Charge

电池饱和后,被测设备继续以微弱Current对电池进行Charge或停止Charge.Charge过程中,被测设备需要实时监控被Charge电池正负极之间的Voltage,并根据其大小调整对电池ChargeCurrent的大小.

Discharge 


Voltage处于或低于下限值（或电量耗尽）时,被测设备停止Discharge.Discharge过程中,被测设备需要实时监控被Discharge电池正负极之间的Voltage,并根据其大小调整给电池DischargeCurrent的大小.

使用模拟电池上位机软件可以模拟出电池被Charge（Discharge）而Voltage不断升高 (decrease) to saturation （达到下限值）的过程,并能直观显示Charge过程中VoltageCurrent随时间变化的曲线关系.

静态Current

被测设备在不工作时,也可能形成微弱的静态Current,产生静态功耗.（外,电池本身也会因物理或化学反应而损耗电能）使用模拟电池上位机软件可以测试被测设备的静态Current,

并能直观显示静态Current随电池正负极之间Voltage的变化而变化的曲线关系.