Product Description:
JK2819 high precision digital bridge is a kind of multifunctional component parameter tester for testing various electronic components. 7 inch 800x480 color TFT LCD disy.
High speed, stable, 20Hz-500kHz multi-frequency points and 0.05percent accuracy can meet the production line quality control, incoming inspection and laboratory measurement requirements
Performance Characteristics:
■ 全新32位核心处理器,数据完全比对国外设备
■ 7英寸真彩TFTThe monitor
■20Hz－500 kHzTest frequency
■ 0.05%的Basic measurement accuracy,测试速度快(75次/秒)
■ Graphic scanning analysis function, support frequency/level/offset scanning, insight into the characteristics of the tested parts
■ Multi-parameter test function.
■单组变压器（滤波器）测试功能
■测试电压或电流的自动电平控制ALC功能
■ 30 Ω, 100 Ω,10/100,10/CC四种不同信号源Output impedance
■ 内建比较器, 10档分选及档计数功能
■10点List scan功能
■Inside100组设定文件,U盘500组测试文件保存或调用
■0V, 1.5V及 2VInside直流偏置电压
■可选±10V（±100mA）直流偏压源或1A直流偏流源
■可通过U盘来实现仪器软件版本的升级和更新
■U盘拷屏、实时保存数据,可支持格式FAT16, FAT32文件系统
■标配RS232C、USB HOST、USB DEVICE、HANDLER、耳机Interface,脚踏开关Interface; OptionalGPIB、LAN
Technical parameters:
Model number |
JK2826 |
JK2828 |
JK2819 |
JK2816U |
JK2817U |
|
Test frequency |
20Hz-5MHz 0.01Hz resolution |
20Hz--2MHz 0.01Hz resolution |
20Hz-500kHz 0.01Hz resolution |
40Hz-200kHz |
100Hz,1kHz,10kHz, 30kHz,40kHz,50kHz, 60kHz,100kHz,120kHz 150kHz |
|
Test parameters |
|z|, |y|,C,L,X,B,R,G,D, Q,θ,DCR |
L,C,R,IZ|,D,Q,X,ESR, θ(Deg),θ (Rad) |
||||
Basic measurement accuracy |
0.05% |
0.1% |
||||
Equivalent circuit |
Series, parallel |
|||||
Mathematical function |
Absolute value deviation, percentage deviation |
|||||
Range mode |
Automatic, hold, manual selection |
|||||
Trigger mode |
Internal, manual, external, Bus |
|||||
Measurement speed (≧1kHz) |
Fast: 75 times/s, medium speed: 12 times/s, slow speed: 3 times/s |
|||||
The average number of times |
1 -255 |
|||||
Delay time |
0-60s, step by 1ms |
|||||
Calibration function |
Open/short/load |
|||||
List scan |
10点List scan功能 |
4点List scan功能 |
||||
Disy mode |
Direct reading,△,△percent, V/I (measured voltage/current monitoring) |
|||||
The monitor |
800X480 RGB7英寸16: 9 TFT LCDThe monitor |
6 digit disy,4.3 "True color |
5-bit disy,4.3 "true color |
|||
Test signal |
|
|||||
Output impedance |
30Ω, 50Ω,100 Ω10 /CC optional |
30Ω, 100 Ω optional |
||||
Test signal电平 |
Normal: 5mV-2 v Accuracy: 10percent, 1 mV step Constant level: 10mV-1V Accuracy: 5percent, 1 mV step |
0.1V、0.3V、1V |
||||
Dc offset source |
Inside |
0v, 1.5V, 2V, accuracy: 1percent |
None |
|||
Optional |
Soil 5V (soil 100mA) DC bias source selection |
None |
||||
1A:0-1A DC bias source option |
None |
|||||
Disy range |
|
|||||
|Z|, R, X |
0.01mΩ -- 99.9999 MΩ |
0.1mΩ -- 99.999 MΩ |
||||
DCR |
0.001mΩ -- 99.9999 MΩ |
None |
||||
|Y|,G, B |
0.00001 μ S -99.9999S |
None |
||||
C |
0.00001pF -9.9999F |
0.01pF -9.9999F |
||||
L |
0.00001 μ H -9999. 99H |
0.01 μ H -99999 H |
||||
D |
0.00001 -- 9.9999 |
0.0001 -- 9.9999 |
||||
Q |
0.00001 -- 9999.9 |
0.0001 -- 9999.9 |
||||
θ (DEG) |
-179.999 ° I 179.999 ° |
-179.99 ° One 179.99 ° |
||||
θ (RAD) |
-3.14159 -3.14159 |
-3.1416 -3.1416 |
||||
Other |
||||||
Comparator function |
Tenth gear: (nine gear qualified,- - gear unqualified), and AUX gear |
5 grade sorting function |
||||
Multiparameter |
Optionally select four parameters for simultaneous measurement and disy |
|
||||
Curve scanning function |
多种测试条件下,对被测件进行图形扫描分选None |
None |
||||
Memory |
Inside存储、USB扩展存储 |
|
||||
Interface |
标配RS232C、HANDLER、USB HOST, USB DEVICE、耳机Interface、脚踏Interface;可选GPIB、LAN |
|||||
