A brief introduction :
JK2516 series is a high precision DC resistance tester. Can be used to detect coil, inductor, transformer, motor,
Relay contact resistance, connector resistance, fuse, cable resistance, PCB wire resistance, welding hole resistance, conductive film,
Metal flaw detection, etc. Is a high speed, high precision, high performance low resistance tester, can meet the production line quality assurance,
Incoming inspection and laboratory measurement requirements, also applicable to automated equipment testing
Performance Characteristics :
■ New 32-bit core processor, complete data comparison with foreign first-class equipment
■ 4.3-inch (LCD resolution 480*272) true color TFT monitor
■ U disk directly save the test results, save more convenient
■ Up to 0.05percent of basic measurement accuracy
■ Built-in comparator, sorting HI,LO,IN
■ More than 100 sets of internal files to save or call,U disk can be extended to save or call more than 500 groups of test files
■ USB HOST can be used to upgrade and update the instrument software version
■ USB flash drive can support FAT16, FAT32 file system
■ Standard RS232C,HANDLER,USB HOST
Technical parameters:
Model number |
JK2516 |
JK2516C |
JK2516A |
JK2516B |
Measuring range |
0.1μΩ-1.0GΩ |
0.1μΩ-110MΩ |
1μΩ-2MΩ |
1μΩ-20kΩ |
Basic accuracy |
0.1μΩ-110MΩ 0.05% 110M-1.0GΩ0.5% |
0.05% |
0.05% |
0.05% |
Number of reading digits |
5 1/2 Bit maximum 115000 disy bits |
|||
Measure the speed of |
4-35 times per second |
|||
Measurement mode |
Warm supplement, routine, benchmark |
Warm and tonic, conventional |
The norm |
|
Range mode |
Automatic, hold, manual selection |
|||
Trigger mode |
Internal, manual, external |
Inside, outside |
||
Calibration function |
Short-circuit zeroing, zeroing, load correction |
|||
Temperature measurement |
-10.0℃~-99.9℃, sensor: PT100 Accuracy: 0.2℃ |
None |
||
Temperature compensation function |
There is (resistance value when the resistance measurement is converted to the set temperature) |
None |
||
Test end configuration |
Four terminals (2 detection terminals and 2 driver terminals) and external shielding ground |
|||
Disy mode |
直读,Δ% |
|||
The range of Test range |
10mΩ ~1000MΩ 12个The range of档 |
10mΩ ~110MΩ 11个The range of档 |
10mΩ ~2MΩ 8个The range of档 |
20mΩ ~20kΩ 7个The range of档 |
Sorting |
Grade 3, absolute value/percentage |
|||
The monitor |
24-bit true color TFT LCD with resolution of 480×272 |
|||
Memory |
U盘500多组 |
|||
Interface |
Standard RS232C HANDLER,USB HOST |
|||
Standard parts |
JK26050S Test cable, Power cord, Warranty card, communication software |
|||
Optional accessories |
26009BSMD Test Clamp,26008ASMD, Beta Box Communication Software Customization |
|||
Size |
上架Size：215mm×87mm×335mm
|
|||
