Product Description:

JK2518 series resistance/temperature scanner simulation test scanning unit adopts the design concept of synchronous plug-in, which can support up to 6 plug-in test units, and realize synchronous measurement between the plug-in boards

Greatly improve the scanning measurement speed. Each measuring board contains 16 test terminals. The combination of test terminals supports user's free programming. Up to 90 resistance/temperature scanning measuring channels can be configured for each channel

The separation and comparison boundary and the output of comparison and separation signal can be designed separately. Temperature measurement sampling mode can be configured for PT500 tinum resistance,PT100 tinum resistance, analog voltage input three ways to apply different

的应用场合.0.05%的The most高电阻精度,在200mΩ量程下,电阻分辨率更是达到了10μ Ω的水准,测试扫描范围从10μ Ω to 200kΩ. Temperature compensation and temperature of the instrument

The conversion function makes the product test exempt from the influence of environmental temperature, can output the whole machine level, the board level and the channel comparison of sorting results, so that your test and data analysis processing, the product sorting work is easier

The standard RS232,USB HOST, and HANDLER interfaces are convenient for you to save measurement data quickly and control the instrument remotely. Touch - enabled 24-bit color solution with resolution of 480×272

Crystal screen, to your measurement operation to bring a different feeling!

Performance characteristics ：

■ Up to 90 - channel resistance/temperature sweep tests

■ The test side of the scan test path is programmable

■ Simultaneous measurement of multiple test units (up to 6 units)

■ Compatible with scanning and single machine two measurement modes

■ Each test unit is free to swap

■ Temperature measurement can support PT100 temperature sampling

■ The most High resistance accuracy: 0.05percent

■ Temperature basic accuracy: 0.2℃

■ 电阻The most小分辨率：10μ Ω

■6板 The most高测试速度可达600 times per second,单板40 times per second

■ Resistance and temperature measurements are supported in both standalone and scan modes

■ 24-bit 7 "color LCD with four-wire resistive touch function

■ Temperature compensation function (TC)

■ Can output channel level, board level, machine level comparison sorting results (over limit, qualified and ring)

■ 30 sets of instrument parameter files are available for storage and loading

■ Screen information is stored on a USB flash drive

■ The data saving function facilitates the real-time saving of measurement results

■ The instrument operating software can be automatically upgraded via USB HOST

■ Optional operation interface in Chinese and English

■ Flexible and convenient file operating system

■ The Handler interface is used to implement online operations

■ RS232,USB HOST,LAN, can facilitate data communication with PC and remote control of the instrument

Technical parameters:

Type number	JK2518B	JK2519
Measurement parameters	Dc resistance · Temperature	Dc resistance · Temperature
Resistance test range	10 μ Ω-200kΩ	1 μ Ω-2 M Ω
Resistance basic test accuracy	0.05%
Resistance range	Automatic and manual ( 20mΩ , 200mΩ,2Ω,20Ω,200Ω,2kΩ,20kΩ,200kΩ)
Temperature传感器类型	PT100 tinum resistance
Temperature测试范围	PT100：-10℃--99.9℃
Temperature测试精度	PT100:0.3percent* Measured value ±0.5℃
Measurement mode	Single machine, scan
Test parameters of each channel	电阻、Temperature（可编程）
Number of scanning channels	15路/卡,The most多可插6卡及90路,卡内通道为扫描测试,测试卡之间为同步测试
Test channel test side selection	Arbitrary configuration between channels (programmable)
Test the current	≤100mA
Measure the speed of	5 0 times per second, 2 0 times per second
Temperature补偿	There is
The monitor	True color 7 "LCD disy
Show the result	At the same time disy 16 test results, support page
Short circuit clear 0 correction	对There is通道支持全量程内短路清零
Comparator	Comparison boundary -- is set separately for each test channel
Limiting mode	ABSDev、ABS、%
Trigger mode	Automatic trigger, manual trigger, bus trigger,Handler trigger, foot switch trigger
Interface	LAN,USB HOST,RS232C,Handler, foot switch
Test end	Four-terminal test
Power requirements	电压：90-125V,190-250V频率：50Hz、60Hz功率：The most大30VA
Size mm	288 W *130 H *320 D

Collection software disy interface