Features:
Suitable for preventing static electricity from electronic parts and drug storage
The new solid polymer electrolyte membrane is installed on the front panel, direct electrolysis and continuous removal of moisture in the box air
Adopt new opening and closing structure, by eliminating the dead zone when opening and closing, can be seamlessly close to the wall installation
The door uses air-tight magnetic suction gasket, open and close the door smoothly
Anti-static performance is very strong
Specifications:
Automatic drying type
Dehumidification: through the solid polymer electrolyte membrane of H2O electrolytic discharge
Humidity setting range :20~50percentRH
Humidity control mode: dial automatic adjustment type (relative humidity)
Humidity control range: about 25percentRH~ indoor humidity (no load in the library, according to the use of the environment)
Low material: ontology/stainless steel (SUS304), door/PVC (vinyl chloride) resin system electricity board, box/aluminum window frame, shelf/stainless steel (SUS430)
The body is attached with a ground terminal at the bottom of the right side (with the ground wire 3m)
Shelf size :490×460mm
Shelf installation spacing :50mm
Shelf interval :40mm
Shelf load resistance: about 20kg/ piece
Casters :φ65mm nylon (with front wheel stopper)
Power supply :AC100V50/60Hz
Power cord :3P plug about 2m
Average power consumption :5W
※ Can be specially customized and additional processing
Power supply Note :
The commodity power supply is AC100V, please be sure to use with 100V transformer
Relevant transformer products, please refer to Chinese 2019 No. 477 page /2017 No. 884 page or directly consult our company
【 Specification Sheet 】
※ It will take about 18 days to send from Japan if Japan is in storage
Freight charge is extra