Product Overview: Fluke 28II Ex native safety true RMS digital multimeter

The Fluke 28 II Ex industrial intrinsic safety digital multimeter has all the measuring functions

Whether you are inside or outside ATEX Zone 1, Zone 2, Zone 21 or zone 22, this tool provides you with all the testing and troubleshooting capabilities you need. No need to carry different instruments for different areas, and no need to worry about carrying non-explosion-proof grade tools through the explosion-proof required areas

• 4-1/2 digital mode for accurate measurement (20,000 words)

• True RMS AC voltage and current can accurately measure nonlinear signals

• Ac and DC voltages and currents up to 1000V and 10A can be measured (note that the Ex zone requires reduced measurements)

• The low-pass filter ensures accurate measurement of voltage and frequency to the variable speed driver (VSD)

• Frequencies up to 200 kHz and duty cycles help you diagnose VSD and switching power supplies

• Resistance, connectivity and diode testing

• The capacity range of the motor starting capacitor or component is 10,000 μF

• High resistance or leakage test conductance measurement

• Capture minimum/maximum mean and peak values to automatically record transients and changes

• Relative mode to exclude interference from the test wire for resistance measurement

• Manual and automatic range selection, flexibility is strong

• When the wire is inserted into the wrong input jack, the input alarm will beep and blink. Lead" To protect your safety

Easy to use

Important additional features ensure that you stay productive all day long in poor locations

• Even if you're wearing full PPE, backlit keyboard buttons provide good visibility in poorly lit areas

• A large digital disy and 2 levels of bright white backlight also add visibility

• Long battery life - usually 400 hours without backlight (alkaline battery)

• Optional magnetic hooks are easy to set up and easy to read, leaving your hands free for other tasks

Convenient on-site maintenance

The split battery case makes it easy to rece batteries or fuses without compromising the accuracy of the instrument

There is a native safety multimeter (DMM) available for IIC (gas) Zone 1 and 2 and IIIC (dust) zone 21 and 22. Whether you work in a petroleum, chemical or pharmaceutical environment, you get all the testing and troubleshooting capabilities you need with this durable intrinsic Safety (IS) multimeter (DMM) manufactured by Fluke. At the same time, the Fluke 28II Ex/CN is water resistant, dust resistant and fall resistant. With Fluke 28II Ex/CN, you can handle all situations, both in and out of the hazard zone, without violating regulations or sacrificing measurement performance