Pressure dew point transmitter for measuring pressure dew point value of air pressure system or drying system.
Configuration products
The use of Tetu reliability proven temperature sensor, data can be stable for a long time
Measuring range :-45 °Ctpd ~ 30 °Ctpd
Connector G ½ or NPT ½-- is optional
Disy main menu interface, easy to operate
Can be directly output, free to choose whether to have the disy function
Field single point calibration
Analog signal output 4 ~ 20 mA (2 wire system) and 2 switch signal alarm output
The lightweight design allows the body to rotate at 350°, making it easier to read data from different angles
The pressure dew point calibration module can be used to calibrate the equipment during the operation of the instrument, without disassembling (2-point pressure calibration module) -> Alternative to dew-point mirror calibration, more economical
| Technical parameters |
|
|---|---|
The shell |
stic, polypropylene |
Size |
199.5 x 37 x 37 (analog signal output interface)
|
Rotatable disy |
350° rotation |
Protection level |
IP 65 |
EMC |
符合89/336 EEC标准 |
Operating temperature |
-20 ~ +70 °C |
Storage temperature |
-40 ~ +80 °C |
| Sensor |
|
Humidity |
Testo HumiditySensor,在 -40 °Ctpd已做低湿校正 |
Temperature |
NTC |
Sensor保护 |
Stainless steel sintered protective cap |
| Measuring range |
|
Pressure dew point |
-60 ~ +30 °Ctpd |
Temperature |
0 ~ 50 °C |
Atmospheric dew point |
-80 ~ -15 °Ctpd (at 30 bar relative pressure)
|
承压 |
testo 6740: Can withstand 50 bar absolute pressure
|
| Uncertainty |
|
Humidity |
/-1 K at 0 °Ctpd
|
Temperature |
+/-0.5 K (0 ~ 50 °C) |
| Analog signal output |
|
Analog signal |
4 ~ 20 mA, 2-wire system |
Output range |
Can be set
|
The output parameter |
°Ctpd, °Ftpd, °CtA, °FtA, % RH, ppmV, mg/m3, °C, °F |
Resolution |
12 Bit |
Precision |
+/-40 μA |
| Switch signal output (optional alarm interface,0554 3302) |
|
Connect |
2 Non-fixed NO (normally open) contact, max. 30 V/ 0.5A |
Switching quantity |
Standard: 6 °/12 °Ctpd, can be set |
| Power supply |
|
Voltage 24V DC (10 ~ 30V) |
With alarm connector (0554 3302) 20 ~ 28 V DC |
Current |
21 mA (without alarm connector)
|
Maximum load |
10 V DC: 100 ohm, 30 V DC: 950 ohm |
