Product specifications: Fluke 725S multifunctional process calibrator
Measurement accuracy | ||
Dc voltage | 30.000 V | 0.02percent 2 counts (upper disy) |
30.000 V | 0.02percent 2 counts (lower disy) | |
100.00 mV | 0.02%+ 2 counts | |
-10.00 mV- 75.00 mV | 0.025 percent 1 count (through the TC connector) | |
Direct current | 24.000 mA | 0.02%+ 2 counts |
Resistance | 15.0 3200.0 Ω—— | 0.1Ω- 1.0Ω |
Frequency | 2.0 | 0.05 % + 0.1 count |
1.0 - 1000.0 Hz | 0.05 % + 0.1 Hz | |
1.0 - 15.0 kHz | 0.05 % + 0.1 kHz | |
10.0 - 15.0 kHz | 0.05 % + 1 count | |
Sensitivity | 1 V Peak value -- Peak value -- Minimum value | |
Pulse | 1 count | 2.0CPM to 10,000Hz |
Pressure | Accuracy | 可选择使用 48 个Pressure模块中的任何一个,模块精度至0.01% |
(有关详细Technical index,请参阅选配件和附件中的Pressure模块) | ||
提供了用于差压、表压、真空Pressure、Pressure、双压和高压的模块. | ||
输出Accuracy | ||
Dc voltage | 100.00 mV | 0.02% + 2 counts |
10.000 V | 0.02% + 2 counts | |
-10.00 mV- 75.00 mV | 0.025 percent 1 count (through the TC connector) | |
Direct current | 24.000 mA (Output) | 0.02%+ 2 counts |
24.000 mA (simulation) | 0.02%+ 2 counts | |
Resistance | The range of | 15 to 400 Ω |
15 to 400 Ω | ||
400 to 1500 Ω | ||
1500 to 4000 Ω | ||
Accuracy | Percentage base of reading | |
0.15Ω | ||
0.1Ω | ||
0.5Ω | ||
1.0Q | ||
Excitation current | 0.15 to 0.5mA | |
0.5 to 2mA | ||
0.05 ~ 0.8 mA—— | ||
0.05 ~ 0.4 mA—— | ||
Frequency | 2.0 | 0.05% |
11000.0 Hz—— | 0.05% | |
1.00 - 10.00 kHz | 0.05% | |
Waveform : | 5 V p-p square wave, 0.1 V offset | |
Pulse | 1 count | 2.0 CPM to 10,000 Hz |
RTD and thermocouple | ||
测量和输出Accuracy: | NI-120 | 0.2 °C |
PT-100 (385) | 0.33 °C | |
PT-100 (392) | 0.30 °C | |
PT-100 (391-JIS) | 0.30 °C | |
PT-200 (385) | 0.20 °C (-200°C -250°C), 0.80°C (250°C -630°C) | |
PT-500 (385) | 0.30 °C (-200°C -500°C), 0.40°C (500°C -630°C) | |
PT-1000 (385) | 0.20 °C | |
Resolution : | 0.01 °C | |
J: | To 0.7 °C | |
K: | To 0.8 °C | |
T: | To 0.8 °C | |
E: | To 0.7 °C | |
R: | To 1.4 °C | |
S: | To 1.5 °C | |
B: | To 1.4 °C | |
L: | To 0.7 °C | |
U: | To 0.75 °C | |
N: | To 0.9 °C | |
XK: | To 0.6 °C | |
BP: | To 1.2 °C | |
Resolution | J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F | |
Technical index | ||
Oblique wave signal | The output function | Voltage、电流、Resistance、Frequency、Pulse、温度 |
The slope | 慢The slope、快The slope、25% StepThe slope | |
Loop power supply | Voltage | 24 V |
Accuracy | 10% | |
Maximum current | 22 mA, short circuit protection | |
Step signal | The output function | Voltage、电流、Resistance、Frequency、Pulse、温度 |
Step | The range of的 25%、 | |
Environment parameters | ||
Operating temperature | -10°c - 55°c | |
Storage temperature | -20°c - 71°c | |
Operating altitude | 3000 m | |
Safety technical parameters | ||
Institutional certification | EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 | |
Mechanical and general parameters | ||
Size | 200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in) | |
The weight of | 650 g (23 oz.) | |
Battery | 4 节 AA 碱性Battery | |
Battery的更换 | 分体式Battery仓盖,不必破坏校准密封即可装卸 | |
Side connection port | Pressure模块连接器,还可用于远程实时编程 |